Useful Links: FAQs Sitemap  
 

Pneumatic Systems & Tools

 

 

All pneumatic machines and tools are powered by compressed air. These compressed air comes out from compressor and through pipe lines it goes to various manufacturing units. This compressed air is further distributed to pneumatic machines and tools through pipe lines.

Generally following pneumatic systems and equipments are used in manufacturing units :

  • Pneumatic ball vibrator
  • Pneumatic die grinders
  • Pneumatic pressure booster
  • Pneumatic double diaphragm pumps
  • Pneumatic air hammer
  • Chipping hammers
  • Pneumatic fittings
  • Pneumatic drifter
  • Pneumatic machines
  • Pneumatic hanger
  • Pneumatic reversible drill
  • Pneumatic press
  • Pneumatic trainer
  • pneumatic stapler
  • Pneumatic shaft
  • Sand rammers

 

  • Pneumatic rotary actuator
  • Pneumatic air cylinders
  • Pneumatic chisels
  • Pneumatic nut tool
  • Pneumatic drifter
  • Pneumatic connector
  • Pneumatic ratchets
  • Mercury pneumatics

 

A major problem in compressed air systems is the presence of water, dust particles, oil (oils particles are introduced by lubricated air compressors) and solid contaminants which can adversely affect air quality.

If the contaminated compressed air will be used through pneumatic tools and machines then there will be following effects :

  • Malfunctioning of pneumatic tools / systems / machines
  • Sluggish and inconsistent operation of valves and cylinder
  • Corrosion in pneumatic systems and  components
  • Increase in maintenance cost of pneumatic machines / tools / controls.

 

The Delair Solution

Remove  water, dust particles, oil (oil particles are introduced by lubricated air compressors) and solid contaminants from compressed air.

Delair offers wide range of refrigeration dryer and adsorption dryers which removed water / moisture from compressed air.

Delair refrigeration dryers operate on the method of cooling the air to near freezing point to remove the moisture and reheating it to approximately 10°C below the incoming compressed air temperature at nominal conditions.

 

Delair Adsorption dryer

The dryers is based on the principle of heatless regeneration and the physical properties of ther desiccant to adsorb and desorb the water vapour, It uses pressure swing principle / purge air to regenerate the desiccant bed.

 
Filters

Delair also offers Pre Filters and Oil Filters which removes dust particles, oil particles and other types of solid contaminated  present in dry air.

Applications

Downloads
Print Email
  • pahwa
  • Bryair
  • drirotor
  • delair
  • tds