| |
provides
PET Bottle Manufacturers
|
 |
| WITH
PROBLEM FREE, COST EFFECTIVE, DRY COMPRESSED AIR |
| |
In the PET bottle manufacturing
process, Compressed air is used to blow the bottles/ containers
to the desired shape and size.
So, no matter what type of machinery is used to blow PET bottles-
be it single stage or two stage, high speed automatic or low
output manual machine- the one thing you will need is dry, clean,
oil-free elevated pressure compressed air of 7 to 40 bar Compressed
air.
Moisture (Condensation
or water vapour) in Compressed air stream leads to clogging
of valves, operation failure, equipment malfunctions, corrosion
thereby increasing down time and increased maintenance cost
of Pneumatic controls.
Moisture laden Compressed Air also leads to problems like
• Loss of clarity i.e. Clouding of PET Bottles/ Containers
• Loss of strength of PET Bottles/ Containers
• Contamination of PET Resin
• Internal Bubbles/ Pockmarks in the Bottles/ Containers
Dry, quality compressed air is an absolute must for PET Blow
Moulding Process
The only positive
means of moisture removal from the compressed air stream is
the installation of an air dryer. Water vapour can economically
be removed by two methods; one is cooling the air and the other
method is by adsorption.
Delair offers a wide range of both refrigeration dryers and
adsorption dryers for all your needs.
For general plant and instrumentation air where requirement
is between 3°C PDP to 6°C PDP, delair refrigeration
dryers, - FDI Series, does the job.
If the application requires extra dry air and PDP below 2°C
then delair has a large range of adsorption Dryers - DC Series
and engineered systems. |
| |
| |
delete
moisture from your compressed air
line by installing 
|
|
| |
|
|
|
 |
