| |
Compressed air is required in
Health Care Facilities to operate
• Surgical instruments such as saws and pneumatic drills
like bone drilling.
• Life Support Equipment like Ventilators
• Respiratory Therapy Apparatus
• Hyperbaric Chambers
• Pneumatic tools for Dental Surgery
• At times as a carrier gas in anaesthesia in place of
oxygen which is very expensive.
Few process control
applications are as critical as installing and maintaining the
systems that delivers vital, life sustaining medical air to
hospital patients. Moisture (Condensation or water vapour) in
Compressed air stream leads to clogging of valves, operation
failure, equipment malfunction, corrosion thereby increasing
down time and increased maintenance cost of Pneumatic controls.
Moisture laden Compressed Air also leads to problems like clogging
of neonatal ventilators and seizing of surgical drills.
Dry, quality compressed air is an absolute
must for Health Care application.
The only positive means of moisture removal
from the compressed air stream is the installation of an air
dryer. Water vapour can economically be removed by two methods;
one is cooling the air and the other method is by adsorption.
Delair offers a wide range of both refrigeration dryers and
adsorption dryers for all your needs.
For general plant and instrumentation air where requirement
is between 3°C PDP to 6°C PDP, delair refrigeration
dryers, - FDI Series, does the job.
If the application requires extra dry air and PDP below 2°C
then delair has a large range of adsorption Dryers - DC Series
and engineered systems. |
